Payment & Shipping Terms:
|Product Name:||Pouch Cell||Rated Voltage:||3.2 V|
|Tab Materials:||Cathode Tab: Aluminum||Retention Capacity:||>95%|
|Max. Charge Current:||Continuous 42A (5C1A)||Max. Discharge Current:||Continuous 170A（20C1A）|
|Cut-off Charge Voltage:||4.20V±0.01V||Casing Material:||Plastic Aluminum|
lifepo4 marine battery,
lifepo4 battery cells
3.2V 8.5Ah LiFePO4 Lithium Battery High Rate Discharging for Start Stop System
Premier custom battery pack manufacturer, 8 years exporting experience to USA and Europe market, Our staff has more than 10 years of accumulated battery engineering and manufacturing experience, Our R&D colleagues are from the top 2 university and scientific institution of studying lithium chemical in china. Strict Quality Control, we set strict QC standards include appearance, package, internal structure, electric performance etc. We promise to offer our customers high quality battery. Customer first culture: 80% of our customers are 5 years above long term partners. 7 x 24 Hours service for you, fastest reply.
|Nominal Capacity||8.5Ah (1C1A charge/discharge)|
|Cut-off Charge Voltage||4.20V±0.01V|
|Standard Charge Method||Charge the battery at a constant current of 8.5A ( 1C1A) to 4.2V, and then charge at a constant voltage of 4.2V(CV) until the charge current is≤0.85A|
|Max. Charge Current||Continuous charge: 42A (5C1A)|
|Standard Discharge Method||Current: 8.5A (1C1A)|
|Cut-off discharge voltage: 2.75V|
|Max. Discharge Current||Continuous discharge: 170A(20C1A)|
|Momentary discharge: 200A(24C1A) (≤30s)|
|Cycle-Life (at room temperature)||≥2000 cycles (100％DOD charge at 1C1A and discharge at 1C1A, Remaining Capacity≥70% Nominal Capacity)|
|Working Temperature||Charge : 0°C ~ 40 °C|
|Discharge: -20°C ~ 55°C|
|Storage Condition||-10°C ~ 40 °C (0 ~ 30 °C recommended) Humidity 30±20%|
|Retention Capacity||>95%( after 28days’ storage at 25°C)|
|Casing Material||Plastic aluminum|
|Tab Materials||Cathode tab: Aluminum||Anode tab: copper (nickel surfaced)|
|Performance Curve||Details as per attached list(page 8)|
A. Solar storage system.
B. Illuminate Devices: Miner lamp, search light, ect.
C. UPS backup
D. Electric vehicles
E. Others: Electric Toys, RC models, model aircraft, backup power, mobile power supply, hand electric drill, ect.
After various test of short circuit, high teperature, low pressure, abuse, squeeze, over charge, over discharge, squeeze test, there is no leakage, no fire and no explosion for our battery cells.
In the period of warranty, there is any problem as the following description, Bestgo Power will take responsible for the replacement and repair.
1. They can not be charged or discharged for the whole battery pack.
2. Under the standard condition for testing, capacity is not same as nominal Capacity.
3. For the low discharge application (discharged as 1C or below), the capacity is less than 80% in the first year, or less than 70% in the 2nd or 3rd year.
4. For the nominal discharge application (Between 1C and 3C), the capacity is less than 80% in the first year, or less than 70% in the 2nd year.
5. There is liquid leakage.
6. There is some damage on battery pack’s case and accessory because it is caused by the battery.
7. The charger or BMS is not working properly.
Contact Person: Candy Yan