Payment & Shipping Terms:
|Product Name:||BMS Battery Protection Board||Number Of Series:||32 Series|
|Continuous Charging Current:||≤ 25 A||Continuous Discharging Current:||≤ 25 A|
|Peak Discharging Current:||≤ 40 A 15sec||Max Weight:||≤ 0.2 Kg|
|Short-circuit Discharge Protection:||65 A||Dimension:||210*80*13 Mm|
bms protection pcb board,
protection circuit board
32S 25A Protection Circuit Board BMS for Lithium Ion Battery Pack
VICT Sailing Power offers a standard PCB (Protective Circuit Board) to protect up to 32 each of your LiFePO4 battery packs in light traction applications like e-bikes or portable power. VICT Sailing Power can also supply a dedicated BMS (with touch screen, CAN BUS) for larger, more complicated, applications. Please consult us for assistance for your specific project.
|Series number of battery pack||32 series|
|Cut-off voltage in charge. (Cell level)||3.8 V ±50 mV|
|Delay time of cut-off in charge state.||1.0 seconds|
|Release volt in charge state. (Cell level)||3.6 V ±50 mV|
|Cut-off volt in discharge. (Cell level)||2.3 V ±50 mV|
|Delay time of cut-off in discharge state.||1.0 seconds|
|Release volt in discharge state. (Cell level)||2.5 V ±50 mV|
|Continuous charging current.||≤ 25A|
|Continuous discharging current.||≤ 25A|
|Peak discharging current. (≤ 15 sec)||40A|
|Short-circuit protection in discharge.||65A|
|Recommend working temperature||-20 ~ 60 °C|
|Max weight||≤ 0.2 kg|
|Dimension||210*80*13 mm (L*W*H)|
Wires should be connected as following order, else BMS will be damaged.
Step 1, connect the "B-" port wire.
Step 2, connect the Data gathering wires, from B1 to B32.
At last, connect the "P-" "C-" wire.
When disassemble wires, reverse the order.
Contact Person: Candy Yan