Product Details:
Payment & Shipping Terms:
|
Product Name: | Motor Bike Start Battery | Material: | Li-LFP |
---|---|---|---|
Dimension: | 185 X 130 X 230 Mm | Max Constant Charge Current: | 25 A |
Max Constant Discharge Current: | 3C | Working Temperature Range: | -20 To 60°c |
Weight: | 4Kg | ||
High Light: | lithium car starter battery,12v lithium starter battery |
12V 25Ah Lithium Starter Battery for Motorcycles , High Power and Long Life
Specifications
No. | Item | General Parameter | Remark |
1 | Rated Capacity | 25Ah | Standard charge(0.2C) after standard discharge(0.5C) |
2 | Minimal Rated Capacity | 24.5Ah | Standard charge(0.2C) after standard discharge(0.5C) |
3 | Nominal Voltage | 12.8V | Mean Operation Voltage |
4 | Cycle Life | Higher than 70% of the Initial Capacities of the Cells( |
◆ Carry out ≥2000cycle |
◆ Standard charge ( 0.2C) after standard discharge(0.5C) | |||
◆ Discharge: 0.2c to 10V | |||
◆ Rest Time between | |||
charge/discharge : 30min. | |||
◆ Temperature:20±5℃ | |||
5 | Voltage at end of Discharge | 10V | Discharge Cut-off Voltage |
6 | Charging Voltage | 14.6V | Charge Cut-off Voltage |
7 | Standard charge | 0.5C CC(constant current)charge to 14.6V,then CV(constant voltage 14.6V)charge till charge current decline to ≤0.01C | Charge time : Approx 2.5h |
8 | Standard discharge | Constant current 1C end voltage 10V | |
9 | Maximum Continuous Charge Current | 25A | |
10 | Maximum Continuous Discharge Current | 3C | |
11 | Maximum Instantaneous Discharge Current | 16C(400A) 3-5S | |
12 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. |
Discharge: -20~60℃ | Bare Cell | ||
13 | Storage Temperature Range | Less than 1 year : -20~25℃ | 60±25%R.H. |
Less than 3 months:-20~40℃ | at the shipment state | ||
14 | Weight | Approx: 4Kg | |
15 | Dimension | High: 185mm | |
Width: 130mm | |||
Long: 230mm |
Advantage of Our Lithium Battery
Manufacturing Process
What we can offer and our capacity
Our capabilities support delivering high quality lithium batteries to our customers where and when they need them:
Quality Control
We do below test before delivering
· Capacity test
· High current discharge test
· Low temperature test
· Short circuit test
· Over charging test
· Over discharging test
· Cycle performance test
· Crush test
· Impact test
· Vibration test
· High temperature test
Contact Person: Candy Yan
Tel: 86-0731-89809858